PowerSeries – Configuring Partitions Panels:
PC5020 (Power864)
Overview:
Configuring partitions is a two-step process: – Enable partition 2 – 8
- Assign zones Program Sections:
Section [201] Section [202] Section [210] Section [218] Section [226] Section [234] Section [241] Section [250] Section [258]
to partition 1 – 8
Step 1 – Partition 2 – 8 Enable
– [209] – [217] – [225] – [233] – [241] – [249] – [257] – [265]
Partition 2 – 8 Enable Partition 1 Zone Assignment Partition 2 Zone Assignment Partition 3 Zone Assignment Partition 4 Zone Assignment Partition 5 Zone Assignment Partition 6 Zone Assignment Partition 7 Zone Assignment Partition 8 Zone Assignment
To enable Partitions 2 to 8 turn ON the appropriate Option in Section [201]. Section [201] Enable Partitions 2 – 8
Step 2 – Partition 1 – 8 Zone Enable
At default, the first 8 zones are enabled on partition 1. If zones 9 to 64 are being used, the zones must be enable before they will operate. To enable a zone in a partition, turn ON the appropriate option in the correct Section.
Note: Note:
Zones assigned to multiple partitions are called ‘common’ zones. These zones will only be armed if all the partitions they are assigned to are armed.
If zones 1 – 8 are not being used on partition 1, they must be disabled in Section [202].
Section [202] – [209] Section [210] – [217] Section [218] – [225] Section [226] – [233] Section [234] – [241] Section [242] – [249] Section [250] – [257] Section [258] – [265]
Partition 1 zones 1 to 64 enable/disable Partition 2 zones 1 to 64 enable/disable Partition 3 zones 1 to 64 enable/disable Partition 4 zones 1 to 64 enable/disable Partition 5 zones 1 to 64 enable/disable Partition 6 zones 1 to 64 enable/disable Partition 7 zones 1 to 64 enable/disable Partition 8 zones 1 to 64 enable/disable Technical Tips:
- At default, zones 1 to 8 are assigned to partition 1. If zones 1 – 8 are not being used on partition 1, they must be disabled in Section [202].
- To see if zones on another partition are functioning properly, a keypad must be loaned or assigned to that partition.
- A keypad assigned or loaned to another partition will not function (no keypad beeps, no ready, arm or zone lights) unless that partition is enabled.
- If a zone does not go into alarm, it may be assigned to multiple partitions.
Quick Test:
Violate each zone and ensure each is displayed on the correct partition keypad. Common zones should display on all partition keypads they are assigned to.
Credit goes to manual